Ender 5 Plus - Big Bird: Difference between revisions

From All Hands Active Wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
No edit summary
Nristow (talk | contribs)
30 edits
Added images
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:Tools]]
The Ender 5 plus has a larger build volume than the Ender 3. It is best for larger prints or printing more parts than you can fit at once on the Ender 3.
The Ender 5 Plus is similar to the Ender 3 printers, but with a larger print area available.
 
Model: Ender 5 plus with linear rail upgrade
 
Hot End: Microswiss REVO direct drive, use Mk8 nozzle
 
Nozzle: 0.8mm
 
Firmware: Klipper


Interface: Fluidd


Build volume: 220x220x300
[[File:2025-04-24 17.52.05.jpg|thumb]]
[[File:2025-04-24 17.52.17.jpg|thumb|Big Bird. An Ender 5 Pro]]
[[Category:Tools]]
{{Stub}}The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using [https://docs.fluidd.xyz/ Fluidd] as the printer interface instead of Octoprint. 


[[Octoprint]] access when you are on the internal space Member Wifi login URL: [https://10.255.225.76 https://10.255.225.74]
The printer has been leveled using the bed mesh command, so adjusting the bed by hand should not be needed.


User: Wally038
The printer is working and the 0.8mm profile can be found in Prusa slicer on the computer in the print room. 


Pass: TheNextGeneration
To access Fluidd when you are on the internal space Member Wifi, use the URL [http://10.255.225.74 http://10.255.225.74]<!-- Raspberry pi SSH information: user rpi, password TheNextGeneration -->

Revision as of 17:31, 24 April 2025

The Ender 5 plus has a larger build volume than the Ender 3. It is best for larger prints or printing more parts than you can fit at once on the Ender 3.

Model: Ender 5 plus with linear rail upgrade

Hot End: Microswiss REVO direct drive, use Mk8 nozzle

Nozzle: 0.8mm

Firmware: Klipper

Interface: Fluidd

Build volume: 220x220x300

Big Bird. An Ender 5 Pro


Alert
Alert
 Stub:
This article is a stub. You can help AHA by expanding it.

The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using Fluidd as the printer interface instead of Octoprint.

The printer has been leveled using the bed mesh command, so adjusting the bed by hand should not be needed.

The printer is working and the 0.8mm profile can be found in Prusa slicer on the computer in the print room.

To access Fluidd when you are on the internal space Member Wifi, use the URL http://10.255.225.74

Retrieved from "https://wiki.allhandsactive.org/index.php?title=Ender_5_Plus_-_Big_Bird&oldid=7766"