Ender 5 Plus - Big Bird: Difference between revisions
Jump to navigation
Jump to search
m mark as stub |
m add why big bird is offline |
||
| Line 6: | Line 6: | ||
To access Fluidd when you are on the internal space Member Wifi, use the URL [http://10.255.225.74 http://10.255.225.74] | To access Fluidd when you are on the internal space Member Wifi, use the URL [http://10.255.225.74 http://10.255.225.74] | ||
Current as of {{#dateformat:2024-09-05}}, Big Bird is offline due to a stability issue. | |||
<!-- Raspberry pi SSH information: user rpi, password TheNextGeneration --> | <!-- Raspberry pi SSH information: user rpi, password TheNextGeneration --> | ||
Latest revision as of 17:49, 5 September 2024
The Ender 5 Plus is similar to the Ender 3 printers, but with a larger print area available.
The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using Fluidd as the printer interface instead of Octoprint. In general, we are still experimenting with settings for this expanded capabilities, so Big Bird is not currently the most reliable printer available; instead, use one of the Ender 3 printers.
To access Fluidd when you are on the internal space Member Wifi, use the URL http://10.255.225.74
Current as of 2024-09-05, Big Bird is offline due to a stability issue.