Ender 5 Plus - Big Bird: Difference between revisions
Printer is working, additional info |
Added images |
||
| Line 12: | Line 12: | ||
Build volume: 220x220x300 | Build volume: 220x220x300 | ||
[[File:2025-04-24 17.52.05.jpg|thumb]] | |||
[[File:2025-04-24 17.52.17.jpg|thumb|Big Bird. An Ender 5 Pro]] | |||
[[Category:Tools]] | [[Category:Tools]] | ||
{{Stub}}The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using [https://docs.fluidd.xyz/ Fluidd] as the printer interface instead of Octoprint. | {{Stub}}The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using [https://docs.fluidd.xyz/ Fluidd] as the printer interface instead of Octoprint. | ||
Revision as of 17:31, 24 April 2025
The Ender 5 plus has a larger build volume than the Ender 3. It is best for larger prints or printing more parts than you can fit at once on the Ender 3.
Model: Ender 5 plus with linear rail upgrade
Hot End: Microswiss REVO direct drive, use Mk8 nozzle
Nozzle: 0.8mm
Firmware: Klipper
Interface: Fluidd
Build volume: 220x220x300
The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using Fluidd as the printer interface instead of Octoprint.
The printer has been leveled using the bed mesh command, so adjusting the bed by hand should not be needed.
The printer is working and the 0.8mm profile can be found in Prusa slicer on the computer in the print room.
To access Fluidd when you are on the internal space Member Wifi, use the URL http://10.255.225.74