Ender 5 Plus - Big Bird

From All Hands Active Wiki
Revision as of 18:56, 20 September 2025 by Lengau (talk | contribs)
Jump to navigation Jump to search

The Ender 5 plus has a larger build volume than the Ender 3. It is best for larger prints or printing more parts than you can fit at once on the Ender 3.

Model: Ender 5 plus with linear rail upgrade

Hot End: Microswiss REVO direct drive, use Mk8 nozzle

Firmware: Klipper

Interface: Fluidd

Build volume: 220x220x300

Big Bird. An Ender 5 Pro


Alert
Alert
 Stub:
This article is a stub. You can help AHA by expanding it.

The Ender 5 Plus has an upgraded motherboard that is now running Klipper firmware to enable input shaping and improved capabilities in general. In tandem with Klipper, we are experimenting with using Fluidd as the printer interface instead of Octoprint.

The printer has been leveled using the bed mesh command, so adjusting the bed by hand should not be needed.

The printer is working and the 0.8mm profile can be found in Prusa slicer on the computer in the print room.

To access Fluidd when you are on the internal space Member Wifi, use the URL http://10.255.225.74

Retrieved from "https://wiki.allhandsactive.org/index.php?title=Ender_5_Plus_-_Big_Bird&oldid=7845"