Face Shield V3

This is Personal Protective Equipment (PPE) for use in healthcare we can craft at the space for emergencies and supply gaps. It is a barrier to prevent droplets coughed/sneezed by one person, from entering the eyes/nose/mouth of another person, to prevent spread of disease.

It is composed of two pieces, a frame, and a visor. The frame is cut from 1/4" Acrylic, and is secured to the head by a rubberband connecting the ends of either arm. The visor mounts on the frame, and is the transparent, stiff plastic that serves as the barrier.

The visor is ideally cut from sheet extruded PETG/PC of 1/64"-1/16". In this case, the 5 holes are used to slide the visor onto the frame, and secure it in place. It is also possible to use commonly available transparency sheets, but these are only large enough for the 3 middle holes. In this case, the visor requires tape or other material to keep it secured to the frame.

• Original Design
• Our Edits, for our laser's workflow