Penguicon Badge 2013

From All Hands Active Wiki
Jump to navigation Jump to search

This is where documentation / credits / kudos for the badge go!

Hey guys, thanks for visiting us at Penguicon! Here are some of the current details about the badge:

The rework is captured in the schematic, but briefly:

  • No load R15
  • No load Q1
  • Place Schottky diode (same as D10) where Q1 is as seen on schematic

BOM Coming soon.

The code is very brief and hacked up from the original source, but rest assured a newer version will be coming soon!

TODO:

  • USB Bootloader!
  • Clean-up and remove un-used code from the source
  • Use bitshift/etc functions!

Questions? #allhandsactive on FreeNode

Assembly Instructions

Each kit should contain the following items:

  • (9) 100Ω resistor (Brown-Black-Brown-Gold) → R1,R2,R3,R4,R5,R6,R7,R8,R9
  • (1) 1.8KΩ resistor (Brown-White-Red-Gold) → R11
  • (2) 68Ω resistor (Blue-Grey-Black-Gold-Brown) → R12,R13
  • (1) 10KΩ resistor (Brown-Black-Orange-Gold) → R14
  • (1) 20Ω resistor (Red-Black-Black-Gold-Brown) → R16
  • (2) 1N5817 Schottky diode → D10,Q1
  • (1) 1N29A Zener diode → D11
  • (2) 18pF capacitor → C1,C2
  • (1) 0.1µF capacitor → C3
  • (1) crystal → X1
  • (1) momentary push-button switch → S1
  • (1) USB type-A plug → I2
  • (9) LED → D1,D2,D3,D4,D5,D6,D7,D8,D9
  • (1) battery holder → J1
  • (1) IC socket → U1
  • (1) ATTiny 4313-PU → socketed