Scroll Saw

From All Hands Active Wiki
Revision as of 18:30, 20 June 2015 by Demure (talk | contribs) (Marked)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The content of this page is outdated.
If you have checked or updated this page and found the content to be suitable, please remove this notice.

This article is a stub. You can help AHA by expanding it.

Rikon 10" Bandsaw

This is a benchtop model bandsaw capable of sawing up to 4 5/8" stock. It can be used with 1/8" - 1/2" blades. Generally, the 1/4" blade will be installed. A 1/4" blade will cut a minimum radius of 5/8". A smaller or larger blade can be installed upon request.


Use caution and common sense when using this tool. It will easily take your finger off.

Follow ALL safety procedures

  1. Secure loose hair and clothing.
  2. Wear safety goggles.
  3. Check and clear your perimeter before starting.
    1. Close the door of the tool room when operating the saw
    2. Do not approach someone while they are using the saw.
  4. Start the saw clear of material. Let it come up to full speed before engaging the blade.
  5. Always keep fingers at least 3 inches away from the blade.
    1. Never guide the material with your hands or fingers in front of the blade.
  6. Only cut stock/material that is flat on the bottom.
    1. Your fingers should never be under the material.
  7. If you need to back the blade out, stop the saw and let the blade come to a complete stop before backing out.
  8. Let the blade come to a complete stop before clearing scrap material.