Computing Resources

From All Hands Active Wiki
Jump to navigation Jump to search

A breakdown of the various computers and other computing hardware currently at the space.

We also have 2 Oculus Rifts on loan from Craig Albert.


MacBook Pro - 15" Retina Mid 2012

Used largely for CNC drawing at events. Battery is in bad shape.

  • 16GB RAM
  • 256GB SSD (could be upgraded)
  • 2.3GHz Quad-Core Intel Core i7

Mac Mini - Late 2014

For the CriCut. Bad SATA controller. External SSD.

  • 4GB RAM
  • 500GB SSD (external)
  • 1.4GHz Dual-Core Intel Core i5

Mac Mini - Late 2012

For the Shapeoko CNC machine.

  • 8GB RAM (could be upgraded to 16GB)
  • 256GB SSD (could be upgraded)
  • 2.3 GHz Quad-Core Intel Core i7

Mac Mini - Late 2012

Currently unused.

  • 8GB RAM (could be upgraded to 16GB)
  • 1TB SSD (could be upgraded)
  • 2.3 GHz Quad-Core Intel Core i7


Custom PC/"AHOPS" build (ca. 2013)

This is the public PC, located in the main room.

  • Motherboard: MSI MS-7721
  • RAM: G.Skill 8GiB (2x4GB) DDR3 1866
  • Processor: AMD APU A10-5800K with Radeon HD graphics
  • HDD: 500 GB 7200RPM WD Blue
  • Here's are the Newegg links originally used to order the parts:
    • Case:
    • PSU:
    • HDD:
    • Mobo:
    • RAM:
    • APU:

Dell Inspiron 3646

This is the 3D printing computer.

  • RAM: 4GiB DDR3 1333 MHz (SODIMM)
  • Processor: Intel Celeron J1800 @ 2.41GHz
  • HDD: 500 GB 7200RPM Seagate Barracuda

Dell Optiplex 980

This is the laser cutter computer.

  • RAM: 8GB
  • CPU: Intel Core i5 650 @ 3.20GHz
  • HDD: 500 GB

UV Printer Computer

Needs to be cataloged.

Servers and VMs

Dell R510

Running proxmox and hosting "production" VMs

  • 24 CPU cores
  • 256GB RAM
  • a couple 1 or 2TB spinners
  • we should put the disks from the dell R710 in the R510
  • idrac

Ubuntu Docker host VM

This is a vm running ubuntu LTS, targeted at running whatever miscellaneous "production" stuff the space may need. docker containers in particular, but not limited to that

  • ubuntu 22.04 LTS
  • 16GB ram
  • 4 CPU cores

Sun Xfire 4x00

This is a quite old server, not very power efficient. it is intended to be a playground for playing around with whatever, but not for any long term use. it is typically powered off, but can be powered on remotely via ipmi.

  • IPMI management address
  • maybe 8 cores?
  • maybe 64GB ram?
  • a few 136GB spinners

3D Printers

IP addresses for all the 3D printer pis can be found on the Network Resources page.

Raspberry Pi 3

These Raspberry Pis run Octoprint to control the 3D printers on the LAN. The wifi cards are failing and Ethernet connections are required.

  • 1GB RAM
  • Quad Core 1.2GHz Broadcom CPU

The software updates for these devices are being managed through Ansible.

Raspberry Pi 4B

One 4GB Raspberry Pi 4B is running Fluidd to control the Ender 5 Plus 3D printer on LAN.