Scroll Saw: Difference between revisions
Jump to navigation
Jump to search
m (Marked) |
m (Removed section on 10" bandsaw that is no longer in workshop, moved that section to bandsaw page. Changed section header to reflect the scroll saw in workshop, added link to manual.) |
||
| Line 7: | Line 7: | ||
== | |||
== Delta 16” Variable Speed Scroll Saw == | |||
[[:File:40540.pdf|Manual]] | |||
==Safety== | ==Safety== | ||
Revision as of 20:33, 18 January 2024
Delta 16” Variable Speed Scroll Saw
Safety
Use caution and common sense when using this tool. It will easily take your finger off.
Follow ALL safety procedures
- Secure loose hair and clothing.
- Wear safety goggles.
- Check and clear your perimeter before starting.
- Close the door of the tool room when operating the saw
- Do not approach someone while they are using the saw.
- Start the saw clear of material. Let it come up to full speed before engaging the blade.
- Always keep fingers at least 3 inches away from the blade.
- Never guide the material with your hands or fingers in front of the blade.
- Only cut stock/material that is flat on the bottom.
- Your fingers should never be under the material.
- If you need to back the blade out, stop the saw and let the blade come to a complete stop before backing out.
- Let the blade come to a complete stop before clearing scrap material.