Computing Infrastructure

Networks

Internets

Internet connection is provided by ACD.

More information about the internet connection and trouble shooting can be found here: Internets

The connection is a bonded DSL line with 75 down and 15 up. The modem provided has ports 1 and 2 enabled and exposes all devices attached to the internet with semi-static IPs. We cannot administer this device and it is not a router.

WIFI

WIFI is provided by the Ubiquiti Access points throughout the space.

4 DHCP enabled SSID's are provided at present.

SSID: ALLHANDSACTIVE

As of: 6/26/2017 ALLHANDSACTIVE is a general use wifi connection. Each device is limited to 6mbps down. This puts you on the main network.

Password: TheNextGeneration

Future 7/17: This connection to be modified to be a guest connection only

SSID: AllHandsActive-Guest

Throttled AHA public wireless. Defaults to 6mpbs per connection. Time limited to 2 hours. Possible to bill for additional access after the first 2 hours. This places you on a private un-authenticated devices only network.

On connection a login page will pop up. The password is: TheNextGeneration

SSID: AllHandsActive-Annex

Unthrottled AHA public wireless for the Annex.

Future: To be discontinued in 7/17.

SSID: AllHandsActive-Members

Unthrottled AHA member wireless. Secured using your All Hands Active LDAP username and password. Unlimited devices for each member and puts your device on the main network.

This uses Enterprise WPA2 with no certificate, MSCHAPv2.

LAN

Router/Switches

Router Main

Mikrotik Routerboard RB2011UiAS-2HnD-IN Router Instructions: (http://wiki.mikrotik.com/wiki/Manual:TOC)

Maintained by:

• Tyler Worman
• Mike Grube

Runs RouterOS 6. Upgrade rights for versions through RouterOS 8 Routerboard RB2011UiAS-2HnD-IN Runs DNS server with internal static host names configured and uses google DNS after that. Cable modem points to this DNS server.

• IP Address: 192.168.1.3 router.allhandsactive.org (internal)

Workstation Switch

Located in center of workstations

Netgear FS524

Printer

A networked BW Laser Printer

• Model: HP Laserjet 2600N
• IP Address: 192.168.1.7 printer.allhandsactive.org (internal)

BYB Cardswipe

Used for BYB employee's to clock in and out.

• Model: EZ Clocking EC50
• IP Address: 10.1.10.14
• Owner: BYB

NAS

Controls AHA's LDAP server, Radius server, file shares and remote login. The NAS is knows as HUB@AHA. hub.allhandsactive.com:5000 (external)

• Model: Synology DS409
• IP Address: 10.1.10.4 hub.allhandsactive.org (internal)

Maintained by:

• Nick Ristow
• Alex White
• Tyler Worman

More information about this project can be found here: Computing Infrastructure: HUB@AHA

Backups

Machines are fresh installed to same state and are not backed up. The NAS offers recovery in event of a loss of disk. We presently do not do a remote backup of user files.

Mapping drives

Copy setupDrives.vbs to C:\ from \\hub\AHASoftware

In Windows startup Local Group Policy Editor as Admin Under UserConfiguration\Windows Settings\Scripts (Logon/Logoff) add the script as a login script.

This login script maps drives for Software, Home and Share. It redirects the users desktop and my documents folder to their home folder within the NAS. The redirection of desktop/documents is disabled for the admin account.

LDAP Config

See here Computer Infrastructure: LDAP Authentication

Workstations

CNC

This machine is used to run the CNC machine in the back room.

Software

• Windows Vista
• Mach 3 (http://www.machsupport.com/software/mach3/)
• USB SmoothStepper for Mach 3 (http://www.warp9td.com/)
• VCarvePro 6.0 (http://www.vectric.com/products/vcarve.htm)
• Cut3D 1.025 (http://www.vectric.com/products/cut3d.html)

Config

Configs are backed up here: List GIT location

Harware

Specs: List them here, but we really could use a new machine. Connnected to: CNC_Machine

Maintainer

Maintained by: Tyler Worman

Licenses

Licenses to Mach3, VCarve Pro and Cut3D owned by: Tyler Worman

Todo

• Update the tool index in Vcarve and Cut3D
• Backup config for Vcarve and Mach3 to Tyler's GIT/BitBucket repository
• Wipe machine
• Install a Windows 10 license.
• Install CNC software
• Lock machine down to admin and LDAP enabled members (as non-admin accounts!)

Login

Username: CNC

Password: Ask Tyler

BYB LASER (Big Red/Softdog)

Hardware

Specs: List them here

Software

List software here

Maintainer

Who owns and maintains the PC and it's software?

To Do

• Get list of valid users from Greg
• Create LDAP group on NAS
• Install pGina on machine
• Fully update machine and software
• lock down login to admin and pGina NAS users.

AHA LASER

Hardware

Specs: List them here

This PC is currently not turned on. It was tested on 2/6 and is sitting by Erik O'Green's stuff.

It needs to be cleaned. It should be wiped and restored.

Tyler W. has the registration info for the software.

Software

Inkskape Gimp Retina Engrave

Maintainer

Who owns and maintains the PC and it's software?

To Do

• Clean
• Extract image from machine so we have a backup before wiping. (unsure how authentication of software will go)
• Create LDAP group on NAS for Little laser
• Install pGina on machine
• Fully update machine and software
• lock down login to admin and pGina NAS users.

Camera Computer

This machine is designed to give a view to the outside world. Login as AHA-Guest and start iSpy to view the remote cameras. You can leave the machine logged in. It does not record any of the video feeds.

Current state

Specs:

• AHA-PC6 - Windows 10 Pro

AHA installed software

Individual Installed:

pGina

Virtual Box

iSpy 64

Ninite installed:

Chrome	Firefox
DropBox	Google Drive	Skype	VLC	Audacity
Java 8	JDK 8	.Net 4.6	Python
Notepad++	Eclipse
PuTTY	WinSCP	7 ZIP	WinRAR	FileZilla
Gimp	Inkscape	Paint.Net
LibreOffice	PDF Creator

Rebuilding a Workstation

Guide for performing a similar build is linked below. Do not install Steam (un-install after Ninite run) and do not install any individual software except what is listed above. Computer_Infrastructure:_Building_new_Workstation_image

5 Public Workstations

Current state

Specs:

• AHA-PC1 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
• AHA-PC2 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
• AHA-PC3 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
• AHA-PC4 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
• AHA-PC5 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)

To do

• Setup Rhino 3D and Zoo on all PCs

AHA installed software

Individual Installed:

pGina	RunAsGui	Steam	Arduino Studio	Unity Game Engine	Blender	Virtual Box	Fusion 360
OpenSCAD	LibreCAD	FreeCAD	EagleCAD	KiCAD	Rhino	Sprocketeer 2.0	3d Connexion	Altium Circuit Maker

Ninite installed:

Chrome	Firefox	Steam
DropBox	Google Drive	Skype	VLC	Audacity
Java 8	JDK 8	.Net 4.6	Python
Notepad++	Eclipse
PuTTY	WinSCP	7 ZIP	WinRAR	FileZilla
Gimp	Inkscape	Paint.Net
LibreOffice	PDF Creator

Rebuilding a Workstation

Guide here: Computer_Infrastructure:_Building_new_Workstation_image

Virtual Machines

Future State: HUB@AHA has a VM folder in the AHASoftware share. It will be mounted to the 6 public workstations at login. Need someone to build these. Demure was interested. It's maintained by AHA members and configured with default settings for the space. You may clone the image for your personal use.

Todo

• Create base image
• Install additional software
• Configure home directory mount via LDAP.
• Install VirtualBox extensions.
• Mark it read only.
• Share to network via NAS.
• Configure login script to mount this share at login.

Base Image

A base install of the latest LTR Ubuntu image that is reasonably patched?

Additional software

These packages are installed in addition to the base install.

• Arduino
• Eclipse
• JDK
• Inkscape
• Gimp
• Blender
• OpenSCAD

If you need additional packages please contact xxxx to request a base package be added to the distribution.

Usage pattern

Copy the VM to your private folder on the NAS and use as needed. Wipe/Restore from base image as needed.