Computing Infrastructure: Difference between revisions

From All Hands Active Wiki
Jump to navigation Jump to search
← Older edit
VisualWikitext
RachelN (talk | contribs)
317 edits
m →‎Networks: Added link to orphaned resources page
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
=Networks=
=Networks=
Also see the article [[Network Resources]].
==Internets==
==Internets==
Internet connection is provided by ACD.
Internet connection is provided by ACD.
Line 77: Line 79:


===Printer===
===Printer===
See [http://wiki.allhandsactive.org/Printers]
See [[Printers]]


* Model: HP LaserJet Pro 400 Color MFP
* Model: HP LaserJet Pro 400 Color MFP
* IP Address: 192.168.1.7 printer.allhandsactive.org (internal)
* IP Address: 192.168.1.7 printer.allhandsactive.org (internal)


 
[[Category:Infrastructure]]


===NAS===
===NAS===
{{outdated}}
Controls AHA's LDAP server, Radius server, file shares and remote login. The NAS is knows as HUB@AHA.
Controls AHA's LDAP server, Radius server, file shares and remote login. The NAS is knows as HUB@AHA.
hub.allhandsactive.com:5000 (external)
hub.allhandsactive.com:5000 (external)
Line 114: Line 117:


=Workstations=
=Workstations=
==CNC==
A full list of available workstations is located at [[Computing Resources]].
This machine is used to run the CNC machine in the back room.
 
==LASER (Big Red/Softdog)==
===Hardware===
Specs:
List them here


===Software===
===Software===
* Windows Vista
* Inkscape
* Mach 3 (http://www.machsupport.com/software/mach3/)
* LaserCut 5.3
* USB SmoothStepper for Mach 3 (http://www.warp9td.com/)
* VCarvePro 6.0 (http://www.vectric.com/products/vcarve.htm)
* Cut3D 1.025 (http://www.vectric.com/products/cut3d.html)


===Config===
===Maintainer===
Configs are backed up here: List GIT location
Who owns and maintains the PC and it's software?


===Harware===
===To Do===
Specs: List them here, but we really could use a new machine.
* Get list of valid users from Greg
Connnected to: [[CNC_Machine]]
* Create LDAP group on NAS
* Install pGina on machine
* Fully update machine and software
* lock down login to admin and pGina NAS users.


===Maintainer===
==3D Printing==
Maintained by: Tyler Worman
===Hardware===
Specs:
List them here


===Licenses===
===Software===
Licenses to Mach3, VCarve Pro and Cut3D owned by: Tyler Worman
List installed software here


===Todo===
===Maintainer===
* Update the tool index in Vcarve and Cut3D
Who owns and maintains the PC and it's software?
* Backup config for Vcarve and Mach3 to Tyler's GIT/BitBucket repository
* Wipe machine
* Install a Windows 10 license.
* Install CNC software
* Lock machine down to admin and LDAP enabled members (as non-admin accounts!)


===Login===
==Front Desk==
Username: CNC


Password: Ask Tyler
Lives under the desk below the TV monitor in the front room. Also hooked up to the [[Vinyl Cutter]].


==BYB LASER (Big Red/Softdog)==
===Hardware===
===Hardware===
Specs:
List them here


===Software===
===Software===
List software here
* Ubuntu--what version?
* Inkscape
* InkCut
* List other installed software here


===Maintainer===
===Maintainer===
Who owns and maintains the PC and it's software?
Who owns and maintains the PC and it's software?
===To Do===
* Get list of valid users from Greg
* Create LDAP group on NAS
* Install pGina on machine
* Fully update machine and software
* lock down login to admin and pGina NAS users.


==5 Public Workstations==
==5 Public Workstations==

Latest revision as of 11:29, 28 November 2023

Networks

Also see the article Network Resources.

Internets

Internet connection is provided by ACD.

More information about the internet connection and trouble shooting can be found here: Internets

The connection is a bonded DSL line with 75 down and 15 up. The modem provided has ports 1 and 2 enabled and exposes all devices attached to the internet with semi-static IPs. We cannot administer this device and it is not a router.

WIFI

WIFI is provided by the Ubiquiti Access points throughout the space.

4 DHCP enabled SSID's are provided at present.

SSID: AllHandsActive-Guest

Throttled AHA public wireless. Defaults to 4mpbs per connection. This places you on a private un-authenticated devices only network.

SSID: AllHandsActive-Members

Unthrottled AHA member wireless. Secured using your All Hands Active LDAP username and password. Unlimited devices for each member and puts your device on the main network.

This uses Enterprise WPA2 with no certificate (or don't check), TTLS, MSCHAPv2. Many interfaces include a field for anonymous identity - this can be left blank.

LAN

Router/Switches

Router Main

Unifi Security Gateway (192.168.1.1)

Maintained by:

  • Tyler Worman

Managed by Ubiquiti Cloud Key management interface on https://192.168.1.2

Provides DHCP, routing and firewall rules. Allows for load balancing 2 internet connections or fail-over via current disconnected WAN2 port. This does not have a built in Switch.

  • IP Address: 192.168.1.2 router.allhandsactive.org (internal)

Annex Switch

24 port unmanaged 1GBPS switch is located in the rack at the back of AHA.

Annex Switch

TrendNet router configured in bridge mode. Provides AllHandsActive-Annex Wi-fi SSID.

Located in the Annex provides hardwired annex ports. Runs off port 24 on the patch panel.


Network devices

NestCams

3 Nest cams are located throughout the space. They are DHCP via wifi AllHandsActive

In Ubiquiti Control software they are tagged as NestCam 1, 2, and 3 so you can monitor their traffic.

Ubiquiti Cloud Key

Allows management of the network, support for LDAP/Radius wifi users and hot spots, and 30 days of rolling network logs.

IP: 192.168.1.2

Ubiquiti Access Point

Located in the main space and provides all but the -Annex AHA wifi SSID

IP: 192.168.1.5

BYB Cardswipe

Used for BYB employee's to clock in and out.

  • Model: EZ Clocking EC50
  • IP Address: DHCP? Should be 192.168.1.8
  • Owner: BYB

DoorPI / Gatekeeper

Rasspberry PI to control the LDAP to Door connection and card reader.

IP: 192.168.1.6

Maintained by:

  • Nate Yost
  • Tyler Worman

Printer

See Printers

  • Model: HP LaserJet Pro 400 Color MFP
  • IP Address: 192.168.1.7 printer.allhandsactive.org (internal)

NAS

Notice
Notice
 OUTDATED!:
The content of this page is outdated.
If you have checked or updated this page and found the content to be suitable, please remove this notice.

Controls AHA's LDAP server, Radius server, file shares and remote login. The NAS is knows as HUB@AHA. hub.allhandsactive.com:5000 (external)

  • Model: Synology DS409
  • IP Address: 192.168.1.4 hub.allhandsactive.org (internal)

Maintained by:

  • Nick Ristow
  • Tyler Worman
  • Brian Morse

More information about this project can be found here: Computing Infrastructure: HUB@AHA

Backups

Machines are fresh installed to same state and are not backed up. The NAS offers recovery in event of a loss of disk. We presently do not do a remote backup of user files.

Mapping drives

Copy setupDrives.vbs to C:\ from \\hub\AHASoftware

In Windows startup Local Group Policy Editor as Admin Under UserConfiguration\Windows Settings\Scripts (Logon/Logoff) add the script as a login script.

This login script maps drives for Software, Home and Share. It redirects the users desktop and my documents folder to their home folder within the NAS. The redirection of desktop/documents is disabled for the admin account.

LDAP Config

See here Computer Infrastructure: LDAP Authentication

Workstations

A full list of available workstations is located at Computing Resources.

LASER (Big Red/Softdog)

Hardware

Specs: List them here

Software

  • Inkscape
  • LaserCut 5.3

Maintainer

Who owns and maintains the PC and it's software?

To Do

  • Get list of valid users from Greg
  • Create LDAP group on NAS
  • Install pGina on machine
  • Fully update machine and software
  • lock down login to admin and pGina NAS users.

3D Printing

Hardware

Specs: List them here

Software

List installed software here

Maintainer

Who owns and maintains the PC and it's software?

Front Desk

Lives under the desk below the TV monitor in the front room. Also hooked up to the Vinyl Cutter.

Hardware

Software

  • Ubuntu--what version?
  • Inkscape
  • InkCut
  • List other installed software here

Maintainer

Who owns and maintains the PC and it's software?

5 Public Workstations

Current state

Specs:

  • AHA-PC1 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
  • AHA-PC2 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
  • AHA-PC3 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
  • AHA-PC4 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)
  • AHA-PC5 - Win 10 Pro AMD A10-5800K 3.8GHZ 8GB (LDAP)

To do

  • Setup Rhino 3D and Zoo on all PCs

AHA installed software

Individual Installed:

pGina RunAsGui Steam Arduino Studio Unity Game Engine Blender Virtual Box Fusion 360
OpenSCAD LibreCAD FreeCAD EagleCAD KiCAD Rhino Sprocketeer 2.0 3d Connexion Altium Circuit Maker

Ninite installed:

Chrome Firefox Steam
DropBox Google Drive Skype VLC Audacity
Java 8 JDK 8 .Net 4.6 Python
Notepad++ Eclipse
PuTTY WinSCP 7 ZIP WinRAR FileZilla
Gimp Inkscape Paint.Net
LibreOffice PDF Creator

Rebuilding a Workstation

Guide here: Computer_Infrastructure:_Building_new_Workstation_image

Virtual Machines

Future State: HUB@AHA has a VM folder in the AHASoftware share. It will be mounted to the 6 public workstations at login. Need someone to build these. Demure was interested. It's maintained by AHA members and configured with default settings for the space. You may clone the image for your personal use.

Todo

  • Create base image
  • Install additional software
  • Configure home directory mount via LDAP.
  • Install VirtualBox extensions.
  • Mark it read only.
  • Share to network via NAS.
  • Configure login script to mount this share at login.

Base Image

A base install of the latest LTR Ubuntu image that is reasonably patched?

Additional software

These packages are installed in addition to the base install.

  • Arduino
  • Eclipse
  • JDK
  • Inkscape
  • Gimp
  • Blender
  • OpenSCAD


If you need additional packages please contact xxxx to request a base package be added to the distribution.

Usage pattern

Copy the VM to your private folder on the NAS and use as needed. Wipe/Restore from base image as needed.

Retrieved from "https://wiki.allhandsactive.org/index.php?title=Computing_Infrastructure&oldid=7024"