Search results

* Zone 1: The Classroom † † Zones 1 & 2 are our most public-facing rooms and should be kept neat and looking pr ...

* Following up with past due members (1 reminder) ...

## Supports wired connections on port 1 and 2. Exposes anything connected to the internet.## Connected to it: ...

|'''1. Equipment''' |''In case of fire, dial 9-1-1 after which follow the AHA policy and guidelines.'' ...

*1" Skew Chisel *1/2" Bowl Gouge ...

1) Download the yaml and ini files ...

...ike we use are max of 1/16 step. We have ours set to 1/8 step for X and Y, 1/4 step for Z and full step for A. ...stepper for Z takes 200 turns per rotation. We use full steps for Z so 200/1.25 = 160 steps per MM. ...

...ieces can be quickly cut on our [[Laser Cutter]]. The headband is cut from 1/4" Acrylic. The front shield mounts on the frame, and is the transparent, s * [https://grabcad.com/library/covid19-face-shield-hole-punch-v1-1-1 Original Files] - Original design. Download held ransom behind a login wall ...

...n be quickly cut on our [[Laser Cutter]]. The headband strips are cut from 1/16" ABS, are heat-formed and solvent welded together, and secured to the he ...

1) the owner’s name, 2) an issue date, 3) an expected completion date, 4) the ...

Current space is roughly ~1,200 sq ft of space. ...

1) Full membership: $50 if you are not a student / starving hacker, $20 if yo 1) Full membership: $50 if you are not a student / starving hacker, $20 if yo ...

| 1 ...

...the bit into the machine correctly and that the shank is inserted at least 1" into the collet === Step 1: Secure Your Stock === ...

==1/20/2013 - Front Door/Entrance way.== ...eed work, '''talk to Josh'''. Sizes of remaining holes: 6 x 3.5, 1 x 3.75, 1 x 4, 4 x 7, 2 x 7.25, 2 x 7.5 (num holes * inches diameter for each hole). ...

*Don't try to scan objects that only come up off your base by ~1/2". We had better success with objects ~8" x ~6" x ~6" ==Skanect 1.5 with PrimeSense Carmine 1.09== ...

...r tube and power supply were upgraded , and the rotary drive purchased in 1/23 using a grant funded by the American Rescue Plan Act and distributed by 1/23 Tube and power supply replaced. Tube measures 90W at full power ...

* Add a network printer, it won't find it so manually add via TCP/IP 10.1.10.2 Do not share printer ...to extract to it's own folder. You'll need to move Disk 2/3 into the disc 1 folder. ...

...enough that the tiny o-ring between two pieces of wood is at a position of 1/2 to 3/4 of the way compressed (per the site!) ...

...is a bonded DSL line with 75 down and 15 up. The modem provided has ports 1 and 2 enabled and exposes all devices attached to the internet with semi-st Unifi Security Gateway (192.168.1.1) ...